ADAS Calibration
Advanced Driver Assistance System Calibration — All Makes & Models
Modern vehicles rely on cameras, radar, and lidar sensors to power safety features like autonomous emergency braking, lane departure warning, and adaptive cruise control. These systems — collectively known as ADAS (Advanced Driver Assistance Systems) — require precise calibration after windscreen replacement, bodywork repairs, or wheel alignment changes. JLR Autocare provides professional ADAS calibration at our Hitchin workshop using manufacturer-approved equipment.
ADAS calibration is not optional — it is a safety-critical requirement. If your windscreen has been replaced, your vehicle has had front-end bodywork repairs, or the wheel alignment has been adjusted, your ADAS cameras and sensors almost certainly need recalibrating. Driving with miscalibrated ADAS is dangerous — lane keeping assist could steer you into oncoming traffic, and autonomous emergency braking could fail to detect an obstacle.
We use manufacturer-approved calibration equipment that meets the exacting standards required by vehicle manufacturers. Our calibration process follows the precise procedures specified by each manufacturer, using the correct target boards, alignment tools, and diagnostic software.
Static calibration is performed in our workshop using precision target boards positioned at exact distances and heights specified by the manufacturer. Dynamic calibration requires a road test on suitable roads at specific speeds, with the diagnostic equipment monitoring sensor alignment in real-time.
ADAS calibration is increasingly required after routine work like wheel alignment and suspension repairs. If your vehicle has ADAS features and you have had any work that could affect camera or sensor positioning, please ask us about calibration.
What's Included
Front camera calibration (windscreen-mounted)
Front radar calibration (adaptive cruise control)
Rear camera and parking sensor calibration
Surround-view / 360° camera system calibration
Blind-spot monitoring sensor calibration
Post-windscreen-replacement calibration
Post-collision / bodywork repair calibration
All makes supported — Land Rover, BMW, Audi, Mercedes & more
Or call us on 01462 420999
Quick answers
- How much does ADAS calibration cost at JLR Autocare in Hitchin?
- It depends on the vehicle and the fault, so we give a written estimate with parts and labour separated before any work starts, and ask before going over it.
- Who does ADAS calibration near Hitchin for Land Rover, Jaguar and German cars?
- JLR Autocare at Wilbury Way, Hitchin, Hertfordshire — an independent Jaguar, Land Rover, Range Rover and German car specialist using dealer-level diagnostic equipment.
- How do I book ADAS calibration?
- Book online at www.jlrautocare.co.uk/book or call 01462 420999.
Frequently asked questions
When does ADAS need calibrating?
After windscreen replacement, front-end bodywork repair, wheel alignment adjustment, suspension work, or any time a camera or sensor has been disturbed.
How long does ADAS calibration take?
Static calibration typically takes 1–2 hours. If dynamic (road test) calibration is also required, allow an additional 30–60 minutes.
Can you calibrate Land Rover and Range Rover ADAS?
Yes. We calibrate ADAS systems on all Land Rover and Range Rover models using JLR diagnostic equipment.
Book your car in with JLR Autocare
29 Wilbury Way, Hitchin, Hertfordshire, SG4 0TW. Call the workshop or book a slot online and we will confirm the price before any work starts.